Tag Archives: semiconductors

In a pioneering study, Professor Menon and his team were able to discover half-light, half-matter particles in atomically thin semiconductors (thickness ~ a millionth of a single sheet of paper) consisting of two-dimensional (2D) layer of molybdenum and sulfur atoms arranged similar to graphene. They sandwiched this 2D material in a light trapping structure to realize these composite quantum particles.

Credit: CCNY

Study Unveils New Half-Light Half-Matter Quantum Particles

Prospects of developing computing and communication technologies based on quantum properties of light and matter may have taken a major step forward thanks to research by City College of New York physicists led by Dr. Vinod Menon.

In a pioneering study, Professor Menon and his team were able to discover half-light, half-matter particles in atomically thin semiconductors (thickness ~ a millionth of a single sheet of paper) consisting of two-dimensional (2D) layer of molybdenum and sulfur atoms arranged similar to graphene. They sandwiched this 2D material in a light trapping structure to realize these composite quantum particles.

“Besides being a fundamental breakthrough, this opens up the possibility of making devices which take the benefits of both light and matter,” said Professor Menon.  

In a pioneering study, Professor Menon and his team were able to discover half-light, half-matter particles in atomically thin semiconductors (thickness ~ a millionth of a single sheet of paper) consisting of two-dimensional (2D) layer of molybdenum and sulfur atoms arranged similar to graphene. They sandwiched this 2D material in a light trapping structure to realize these composite quantum particles. Credit: CCNY
In a pioneering study, Professor Menon and his team were able to discover half-light, half-matter particles in atomically thin semiconductors (thickness ~ a millionth of a single sheet of paper) consisting of two-dimensional (2D) layer of molybdenum and sulfur atoms arranged similar to graphene. They sandwiched this 2D material in a light trapping structure to realize these composite quantum particles.
Credit: CCNY

For example one can start envisioning logic gates and signal processors that take on best of light and matter. The discovery is also expected to contribute to developing practical platforms for quantum computing. 

Dr. Dirk Englund, a professor at MIT whose research focuses on quantum technologies based on semiconductor and optical systems, hailed the City College study.

“What is so remarkable and exciting in the work by Vinod and his team is how readily this strong coupling regime could actually be achieved. They have shown convincingly that by coupling a rather standard dielectric cavity to exciton–polaritons in a monolayer of molybdenum disulphide, they could actually reach this strong coupling regime with a very large binding strength,” he said. 

Professor Menon’s research team included City College PhD students, Xiaoze Liu, Tal Galfsky and Zheng Sun, and scientists from Yale University, National Tsing Hua University (Taiwan) and Ecole Polytechnic -Montreal (Canada).

The study appears in the January issue of the journal “Nature Photonics.” It was funded by the U.S. Army Research Laboratory’s Army Research Office and the National Science Foundation through the Materials Research Science and Engineering Center – Center for Photonic and Multiscale Nanomaterials. 

Source: The City College New of York

Light enters a two-dimensional ring-resonator array from the lower left and exits at the lower right. Light that follows the edge of the array (blue) does not suffer energy loss and exits after a consistent amount of delay. Light that travels into the interior of the array (green) suffers energy loss. 
Credit: Sean Kelley/JQI

On-chip Topological Light

FIRST MEASUREMENTS OF TRANSMISSION AND DELAY

Topological transport of light is the photonic analog of topological electron flow in certain semiconductors. In the electron case, the current flows around the edge of the material but not through the bulk. It is “topological” in that even if electrons encounter impurities in the material the electrons will continue to flow without losing energy.

Light enters a two-dimensional ring-resonator array from the lower left and exits at the lower right. Light that follows the edge of the array (blue) does not suffer energy loss and exits after a consistent amount of delay. Light that travels into the interior of the array (green) suffers energy loss.  Credit: Sean Kelley/JQI
Light enters a two-dimensional ring-resonator array from the lower left and exits at the lower right. Light that follows the edge of the array (blue) does not suffer energy loss and exits after a consistent amount of delay. Light that travels into the interior of the array (green) suffers energy loss.
Credit: Sean Kelley/JQI

In the photonic equivalent, light flows not through and around a regular material but in a meta-material consisting of an array of tiny glass loops fabricated on a silicon substrate. If the loops are engineered just right, the topological feature appears: light sent into the array easily circulates around the edge with very little energy loss (even if some of the loops aren’t working) while light taking an interior route suffers loss.

Mohammad Hafezi and his colleagues at the Joint Quantum Institute have published a series of papers on the subject of topological light. The first pointed out the potential application of robustness in delay lines and conceived a scheme to implement quantum Hall models in arrays of photonic loops. In photonics, signals sometimes need to be delayed, usually by sending light into a kilometers-long loop of optical fiber. In an on-chip scheme, such delays could be accomplished on the microscale; this is in addition to the energy-loss reduction made possible by topological robustness (see Miniaturizing Delay Lines below).

The 2D array consists of resonator rings, where light spends more time, and link rings, where light spends little time. Undergoing a circuit around a complete unit cell of rings, light will return to the starting point with a slight change in phase, phi. Credit: Sean Kelley/JQI
The 2D array consists of resonator rings, where light spends more time, and link rings, where light spends little time. Undergoing a circuit around a complete unit cell of rings, light will return to the starting point with a slight change in phase, phi.
Credit: Sean Kelley/JQI

The next paper reported on results from an actual experiment. Since the tiny loops aren’t perfect, they do allow a bit of light to escape vertically out of the plane of the array (see Topological Light below). This faint light allowed the JQI experimenters to image the course of light. This confirmed the plan that light persists when it goes around the edge of the array but suffers energy loss when traveling through the bulk.

The third paper, appearing now in Physical Review Letters, and highlighted in a Viewpoint, actually delivers detailed measurements of the transmission (how much energy is lost) and delay for edge-state light and for bulk-route light (see reference publication below). The paper is notable enough to have received an “editor’s suggestion” designation. “Apart from the potential photonic-chip applications of this scheme,” said Hafezi, “this photonic platform could allow us to investigate fundamental quantum transport properties.”

Another measured quality is consistency. Sunil Mittal, a graduate student at the University of Maryland and first author on the paper, points out that microchip manufacturing is not a perfect process. “Irregularities in integrated photonic device fabrication usually result in device-to-device performance variations,” he said. And this usually undercuts the microchip performance. But with topological protection (photons traveling at the edge of the array are practically invulnerable to impurities) at work, consistency is greatly strengthened.

Indeed, the authors, reporting trials with numerous array samples, reveal that for light taking the bulk (interior) route in the array, the delay and transmission of light can vary a lot, whereas for light making the edge route, the amount of energy loss is regularly less and the time delay for signals more consistent. Robustness and consistency are vital if you want to integrate such arrays into photonic schemes for processing quantum information.

How does the topological property emerge at the microscopic level? First, look at the electron topological behavior, which is an offshoot of the quantum Hall effect. Electrons, under the influence of an applied magnetic field can execute tiny cyclonic orbits. In some materials, called topological insulators, no external magnetic field is needed since the necessary field is supplied by spin-orbit interactions — that is, the coupling between the orbital motion of electrons and their spins. In these materials the conduction regime is topological: the material is conductive around the edge but is an insulator in the interior.

And now for the photonic equivalent. Light waves do not usually feel magnetic fields, and if they do it is very weak. In the photonic case, the equivalent of a magnetic field is supplied by a subtle phase shift imposed on the light as it circulates around the loops. Actually the loops in the array are of two kinds: resonator loops designed to exactly accommodate light at a certain frequency, allowing the waves to circle the loop many times. Link loops, by contrast, are not exactly suited to the waves, and are designed chiefly to pass the light onto the neighboring resonator loop.

Light that circulates around one unit cell of the loop array will undergo a slight phase change, an amount signified by the letter phi. That is, the light signal, in coming around the unit cell, re-arrives where it started advanced or retarded just a bit from its original condition. Just this amount of change imparts the topological robustness to the global transmission of the light in the array.

In summary, documented on-chip light delay and a robust, consistent, low-loss transport of light has now been demonstrated. The transport of light is tunable to a range of frequencies and the chip can be manufactured using standard micro-fabrications techniques.

REFERENCE PUBLICATION
RESEARCH CONTACT
Mohammad Hafezi

|

|

Sunil Mittal

|

|

MEDIA CONTACT
Phillip F. Schewe

|

|

(301) 405-0989

- See more at: http://jqi.umd.edu/news/on-chip-topological-light#sthash.nXI5fKGs.dpuf

Source: Joint Quantum Institute